Comprehensive Fire Services Logo

Passive Fire Stopping: The Unsung Hero of Fire Safety

Passive Fire Stopping
Passive fire stopping is the part of a building’s fire protection that most people never see, because it sits inside walls, floors and ceilings. It seals the gaps where pipes, cables and ducts pass through fire-rated construction, so a fire in one area can’t use those gaps to reach the next. This guide explains what it is, where it’s needed, what goes wrong, and how to check that yours is doing its job.

What Is Passive Fire Stopping?

Passive fire stopping (also called firestopping or penetration sealing) closes the openings in fire-rated walls, floors and ceilings that are left when services are run through them. Every cable, pipe, duct or conduit that passes through a fire-rated element leaves a gap. Left open, that gap can let flames, hot gases and smoke into the next compartment, and it can undo the fire rating of the whole wall or floor. It is one part of passive fire protection, which also covers fire doors, fire-rated walls and floors, and fire-rated hardware. Fire stopping is the part that deals with the holes and joints.

Where Fire Stopping Is Needed

  • Service penetrations: pipes, cables, conduits and ducts passing through fire-rated walls and floors.
  • Service risers and plant rooms: vertical shafts and plant spaces where many services pass through at once. See our guide to fire stopping in plant rooms and vertical risers.
  • Joints: the gap between a fire-rated wall and the floor or ceiling above it, and expansion or control joints.
  • Around fire doors and frames: gaps between a frame and the wall around it. See steel door frames.

Common Fire Stopping Materials

The right product depends on the service, the size of the gap and the wall or floor it passes through:
  • Fire-resistant sealants and mastics: for small gaps around cables and pipes.
  • Intumescent collars and wraps: fitted around plastic pipes. They expand under heat to close the pipe as it softens.
  • Fire-rated putty pads and sealing systems: used around electrical boxes and similar fittings.
  • Fire-rated boards, batts and mortars: for larger openings.
Products are not interchangeable. A fire stopping system is tested as a combination of the product, the service and the wall or floor, so the one you use needs to match the tested system for that situation.

Why Fire Stopping Fails

Most failures happen after the original installation, not at handover:
  • Later trades. Electricians, plumbers and data installers drill new holes or pull cables through existing seals, and the opening is not resealed.
  • Wrong product for the service. A sealant used where a collar was needed, or a product that was never tested for that wall type.
  • Gaps left unsealed. Small openings behind panels, above ceilings or in risers that nobody inspects.
  • No records. Without documentation of what was installed and where, it is hard to show a penetration has been sealed properly.
This is why fire stopping needs checking whenever building work disturbs a fire-rated element, not only at construction.

How to Check Your Building’s Fire Stopping

  1. Walk the fire-rated elements. Check plant rooms, risers, ceiling voids and the edges of fire-rated walls for visible gaps or unsealed penetrations.
  2. Look for recent work. New cabling, pipework or equipment in a fire-rated area is a prompt to check the seals around it.
  3. Ask for the paperwork. Installation records and test or system details help show that the right product was used.
  4. Get it assessed. If you’re not sure, have a qualified contractor inspect and fix anything that doesn’t look right.

How CFS Can Help

Comprehensive Fire Services (CFS) installs and repairs passive fire stopping in strata, commercial and industrial buildings across Sydney. We also supply, install and inspect fire doors, so a building’s fire compartments can be dealt with in one visit. See our testing and inspections service for the doors, or contact us about your fire stopping. Call Now → 0418 749 488 Contact Us → https://www.firedoorspecialists.com.au/contact-us/
Table Of Contents
Latest Blogs
Tags
Our Reviews
Park Sydney profile picture
Park Sydney
1 year ago
Joe has always demonstrated to be professional, reliable and detailed with his work. His broad knowledge, exceptional service and attention to detail means jobs appointed are always done to a very high level of standard. We would highly recommend utilising Joe’s experience and expertise for your building or home maintenance and repairs.
troy cohen profile picture
troy cohen
3 years ago
Comprehensive Fire Services are the specialists for Fire Door installation and rectification. Joes in depth knowledge of building codes and installation standards is an asset as when doing a job, its done right. I’ve had nothing but a positive experience with the team at CFS with them completing 500+ jobs for our business, the quality of work and attention to detail is second to none. I highly recommend there services!
Murray Allan profile picture
Murray Allan
3 years ago
Joe has helped me with several installations and repairs of fire doors and passive fire systems. He is always on time, quotes are prompt, and the work is always exceptional (especially his doors!). Would recommend his services to anyone.
George Feggaris profile picture
George Feggaris
3 years ago
I have been working with Comprehensive Fire Services since 2012, there knowledge, expertise and quality workmanship and attention to detail is amazing. Always on time, site is always left clean at the end of each job. There is no other team I would use. I would highly recommend CFS if you want the job done right. SPM Facilities Management
Greg Clayton profile picture
Greg Clayton
3 years ago
Outstanding Service Highly recommend Comprehensive Fire Services. There work is always of high quality, along with impeccable customer service.
FPAS Accreditation
FPAS Accreditation

FPAS Accreditation Number: F055161A

We are committed to delivering the highest level of professionalism and compliance in the fire protection industry. As part of this commitment, our team holds accreditation under the Fire Protection Accreditation Scheme (FPAS) — the national accreditation framework developed by Fire Protection Association Australia (FPA Australia).

Comprehensive Fire Services Office
Contact Us

Please feel free to contact us via the form below, or call our office on 0418 749 488

We respond within 2 business hours.

Newsletter

© 2026 Comprehensive Fire Services - Website by BSharp Tech